home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tommy Walsh's DIY Guide
/
Tommy Walsh's DIY Guide (2001)(Empire).iso
/
hi
/
awruntime
/
t17a.txt
< prev
next >
Wrap
Text File
|
1998-10-06
|
950b
|
32 lines
Summary
The following are general guidelines to help you
assemble pre-packed free-standing shelves:
1 Assembling each shelf
2 Attaching the shelves to the front struts
3 Attaching the shelves to the rear struts
Tools
Scewdriver
Materials
Free standing shelf kit
Step 1 - Assembling each shelf
If you have any instructions read them thoroughly.
Lay out the contents of the pack in front of you, and
check to see you have the correct number of screws and
other parts. You may need to assemble each shelf by
screwing it together.
Step 2 - Attaching shelves to the front struts
Lay the shelves on their end on the floor and place
the struts on the top in the desired position. Attach
the screws for one whole side first to give it support.
Repeat for the other strut.
Step 3 - Attaching shelves to the rear struts
Repeat the process for the back struts. After a week
or so retighten the screws if necessary.